Add to Favorites
Share

Polywound String Wound Filter Cartridges

  • Description
Product Detail

    Filter Cartridge


    Carbon

    Carbon-Clean Series Filter Cartridges

    A Full Range of High Performance Carbon Cartridges Providing Separation and Purification

    CB-B Series

    ·Carbon Block Design is a Cost Effective Alternative to Granular Activated Carbon Cartridges

    ·FDA Listed Materials Make this a Suitable Choice for Potable Water and Food Service Applications

    ·Rigid Center Core Enhances the Durability of the Filter Cartridge in Demanding Applications

    ·High Porosity Design Maximizes Utilization of Carbon to Prevent Premature Plugging

    ·Polypropylene Inner and Outer Layer Filtration Media Provide Efficient Pre-Filtration and Post-Treatment

    ·Manufactured under a Certified ISO 9001 Quality System

    CB-WS Series

    ·All Materials are FDA Listed for Food and Beverage Contact

    ·Carbon Impregnated Cellulose Media Provides Lower Pressure Drops than Conventional Carbon Block Filter Technology

    ·Carbon Technology Improves Potable Water Quality by Removing Taste, Odor and Color

    ·Polypropylene Pre-filtration Provides a Wide Range of Options to Address Chemical Compatibility Concerns

    ·304 Stainless Steel Center Core Option for High Temperature and High Viscosity Applications

    ·Manufactured under a Certified ISO 9001 Quality System

    CB-RC Series

    ·All Materials are FDA Listed for Food and Beverage Contact

    ·Excellent Polishing Filter for Process or Closed Loop Streams.

    ·High Quality Carbon Sheet Increases the Absorption Efficiency and Capacity of the Filter Cartridge. Removes Chlorine and Eliminates Trace Orders

    ·Rigid Polypropylene Center Core Enhances the Mechanical Strength of the Filter Cartridge

    ·Elastomeric End Caps Enhance Cartridge’s Performance by Minimizing the Chance of Bypass

    ·Manufactured under a Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:     

    ·Filter Media:CB-B Series Bonded Porous Activated Carbon with Polyethylene Binders

    		CB-WS Series Carbon Impregnated Fibers Protected by Upstream and Downstream Polypropylene String Wound Fibers

    		CB-RC Series Powder Activated Carbon Impregnated Polyester

    ·Outer Netting: CB-B Series Polyethylene

    		CB-WS Series None

    		CB-RC Series Polyethylene
    ·End Cap:CB-B Series Polypropylene

    		CB-WS Series None

    		CB-RC Series Polypropylene
    ·Inner / Outer Wrap: CB-B Series Polypropylene

    		CB-WS Series Polypropylene String Wound Fibers 

    		CB-RC Series None

    Dimensions (Nominal)

    ·Lengths: 10” to 30” (254mm to 762mm)

    ·Outside Diameter: 2.56” (65mm)

    ·Removal Rating: CB-B Series 5µm

    		CB-WS Series  5µm

    		 CB-RC Series 5µm

    Operating Conditions:

    ·Maximum Operating Temperature:CB-B Series 40°F to 140°F (5°Cto 60°C)

    		CB-WS Series 40°F to 140oF (5°Cto 60°C)

    		CB-RC Series40°F to 140°F (5oCto 60°C)

    FDA Listed Materials

    All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500)

    Applications

    Organics

    Taste,Odor,
         Color

    Chlorine

    Particle Removal

    Drinking Water

    OK

    OK

    OK

    OK

    Bottle Washing Water

    OK

    OK

    OK

    OK

    Rinse Water

    OK

    OK

    OK

    OK

    RO Pre-filtration

    OK

    OK

    OK

    OK

    PCB Process

    OK

    OK

    OK

    OK

    Printing Process

    OK

    OK

    OK

    OK

    Gases

    OK

    OK

    OK

    OK

    Air, Instrument

    OK

    OK

    OK

    OK

    Air, Breathable

    OK

    OK

    OK

    OK

    Notes:

    1.Drinking Water of Unknown Quality may Require Proper Disinfection or Pre-treatment in Addition to Carbon Filtration.

    2.CB-B and CB-WS Series Contain a Very Small Amount of Carbon Fines. After Installation, Flush the Cartridge for a Minimum of 5 Minutes to Remove All Traces of Carbon Prior to Using Them in the Process. Flush the Tap Water for at Least 20 Seconds Prior Using for Drinking Water or Cooking Purposes.

    3.Steps Should be Taken to Prevent the Filter Cartridge from Freezing. This may Affect Performance.

    Ordering Information

    CB-

    B

    10

    P

    Product Name

    Filter Type

    Cartridge Length

    CoreMaterial

    Carbon- Clean

    B=Carbon Block
    WS=Carbon Sheet with
    PP String Wound    
    RC=Carbon Sheet

    10",20",30"

    P=PP core

    Melt-Blown

    POLY-ADCT Series Filter Cartridges

    Advanced Polypropylene Melt Blown Filter CartridgeswithPolypropylene Core for Demanding Applications

    ·Retention Ratings from 0.5umto 75um

    ·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

    ·Proprietary Center Core for Greater Mechanical Strength

    ·Easy and Safe Cartridge Incineration or Disposal -100% Polypropylene Construction

    ·Free of Surfactants, Binders, Anti-static Agents and Adhesives

    ·All Materials are FDA Listed for Food and Beverage Contact

    ·Double Open End and Single Open End Cartridge Configurations Available

    Product Specifications

    Materials of Construction:

    ·Filter Media: Polypropylene

    ·Center Core: Polypropylene  

    ·End Caps: Polypropylene

    ·Extended Core: Polypropylene

    ·Gaskets/O-Rings: Silicone, Buna-N, Viton , EPDM

    Dimensions:

    ·Outside Diameter: 2.5”(63mm)

    ·Inside Diameter: 1.1” (28mm)

    ·Lengths: 4” to 50” (101.6mm to 1270mm)

    Performance Specifications

    ·Retention Ratings: 0.5, 1,3,5,10,20,30,50,75µm

    Operating Conditions:

    ·MaximumOperatingTemperature: 185°F(85°C)

    ·RecommendedChange Out Differential Pressure: 35psid(2.4 bar)

    FDA Listed Materials

    All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500)

    Toxicity

    All Cartridge Components Meet USP-XXIII, Class V Criteria

    Purity

    All Filter Cartridges are Free of Surfactants, Anti-static agents, Binders and Adhesives

    Ordering Information

    PAT

    5-

    20

    P-

    3

    E

    Product Name

    Retention Rating

    Cartridge Length

    Core Material

    End
         Configurations

    O-ring Materials

    POLY- 

    ADCT

    0.5, 1, 3, 5, 10, 20, 30, 50, 75µm

    4", 9.87", 10", 19.5", 20", 29.5", 30", 39.5", 40", 50"

    P = PP

    DOE = No Symbol  
    3 = SOE with 222 O-rings, Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End
    PE = PE Gaskets

    N = Buna-N
    E = EPDM
    V = Viton
    S = Silicone

    Puris-Fine BB Series Filter Cartridges

    Large Diameter Polypropylene Melt Blown Cartridges

    ·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

    ·Easy and Safe Cartridge Incineration or Disposal

    ·100% Polypropylene Construction

    ·Free of Surfactants, Anti-static Agents, Binders and Adhesives

    ·All Material Meet FDA Requirements for Food and Beverage Contact

    ·Special Outside Diameter of 4.3” (110mm)

    ·Can Retrofit Most Existing Cartridges Used in Large Diameter Housings

    Product Specifications

    Materials of Construction

    ·Filter Media: Polypropylene

    Dimensions:

    ·Outside Diameter: 4.3” (110mm)

    ·Inside Diameter: 1.1” (28mm)

    ·Lengths: 10” to 20” (254mm to 508mm)

    Performance Specifications

    ·Retention Ratings:1, 5,10, 20, 50µm

    Maximum OperatingPressure:

    ·50 psid (3.45 bar) @ ambient

    ·25 psid (1.72 bar) @ 140°F (60°C)

    Recommended Change Out Differential Pressure:

    ·35 psid (2.4 bar)

    FDA Listed Materials:

    Manufactured From Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations.

    Purity:

    All Puris-FineBBFilter Cartridgesare Free of Surfactants, Anti-static Agents, Binders and Adhesives.

    Ordering Information

    PRS

    5-

    10-

    BB

    Product Name

    Retention Rating

    Cartridge Length

    End Configurations

    Puris-Fine BB

    1,5,10,20,50µm

    10”,20”

    BB=For Big Blue SizeHousing

    Puris-Fine Series Filter Cartridges

    High Purity Polypropylene MeltBlown Cartridge can be Used in aWide Range ofApplications

    ·Graded Pore Structure Enhances Dirt Holding Capacity and Filtration Efficiency

    ·Easy and Safe Cartridge Incineration orDisposal

    ·100% Polypropylene Construction

    ·Cartridges are Free of Surfactants, Binders and Adhesives

    ·Cartridges Materials are FDA Listed for Food and Beverage Contact

    ·Materials are NSF Certified

    Product Specifications

    Materials of Construction

    ·Filter Media: MeltBlown Polypropylene 

    ·End Caps: Polypropylene

    ·Extended Core: Polypropylene

    ·Gaskets/O-Rings: Silicone, Buna-N, Viton, EPDM

    Dimensions:

    ·Outside Diameter: 2.5” (63mm)

    ·Inside Diameter: 1.1” (28mm)

    ·Lengths: 4”to 50” (101.6mmto 1270mm)

    Performance Specifications

    ·Retention Ratings: 0.5,1,3,5,10,20,30,50,75µm

    Maximum Differential Pressure:

    ·50 psid (3.45 bar) @ ambient

    ·25 psid (1.72 bar) @ 140°F (60°C)

    Recommended Change Out Differential Pressure:

    ·35 psid (2.4 bar)

    FDA Listed Materials:

    Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations.

    Purity:

    All Puris-Fine Filter Cartridgesare Free of Surfactants, Anti-static Agents, Binders and Adhesives.

    Ordering Information 

    PRS

    5-

    20-

    3

    E

    Product Name

    Retention Rating

    Cartridge Length

    End Configurations

    O-ring Materials

    Puris-
    Fine

    0.5,1,3,5,
    10,20,30,
    50,75µm

    4",9.87",10",19.5",20",
    29.5",30",39.5",40",50"

    DOE = No Symbol  
    3 = SOE with 222 O-rings,
    Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End
    PE = PE Gaskets

    N = Buna-N
    E = EPDM
    V = Viton
    S = Silicone

    Superior-Fine Series Filter Cartridges

    100% Polypropylene MeltBlown Cartridges with a Fixed Pore Structure That Deliver High DirtHolding Capacity and Consistent Performance

    ·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

    ·ProprietaryInter-ZoneBonding Process Provides a Rigid Filtration Structure That does not Compress as the Differential Pressure Increases

    ·High Purity Material Allows Optimization of the Filtration Media For Longer Life and Higher Efficiencies

    ·Easy and Safe Cartridge Disposal via Incineration, Shredding or Compaction

    ·100% Polypropylene Construction – Non-Fiber Releasing Matrix

    ·Cartridges are Free of Surfactants, Binders, Anti-static Agents and Adhesives

    ·Materials are FDA Listed for Food and Beverage Contact

    ·Materials are NSF Certified

    Product Specifications

    Materials of Construction:

    ·Filter Media: MeltBlown Polypropylene 

    ·End Caps: Polypropylene

    ·Extended Core: Polypropylene

    ·Gaskets/O-Rings: Silicone, Buna-N, Viton, EPDM

    Dimensions:

    ·Outside Diameter: 2.5”(63mm)

    ·Inside Diameter: 1.1” (28mm)

    ·Lengths: 4”to 50” (101.6mmto 1270mm)

    Performance Specifications

    ·Retention Rating: 1,3,5,10,20,30,50,75,100µm

    Operating Conditions:

    ·MaximumOperatingTemperature: 158°F(70°C)

    ·RecommendedChange Out Differential Pressure: 35psid(2.4 bar)

    FDA Listed Materials

    All Materials Meet U.S. Food and Drug AdministeredRequirements for Food and Beverage Contact (CFR 177.1500)

    Toxicity

    All Cartridge Components Meet USP-XXIII, Class V Criteria

    Purity

    All Filter Cartridges are Free of Surfactants, Anti-static Agents, Binders and Adhesives

    Ordering Information

    PCB

    5-

    20

    P-

    3

    E

    Product Name

    Retention Rating

    Cartridge Length

    Core Material

    End Configurations

    O-ring Materials

    Superior-Fine

    1, 3, 5, 10, 20, 30, 50, 75, 100µm

    4", 9.87", 10", 19.5", 20", 29.5", 30", 39.5", 40", 50"

    NONE

    DOE = No Symbol  
    3 = SOE with 222 O-rings, Flat Closed End
    8 = SOE with 222 O-rings , Fin End
    7 = SOE with 226 O-rings,
    Fin End
    PE = PE Gaskets

    N = Buna-N
    E = EPDM
    V = Viton
    S = Silicone

    Membrane

    Micro-Flow G Series Filter Cartridges

    Filtrafine POLY-ADCT Series FilterCartridges

    Advanced Polypropylene Melt Blown Filter CartridgeswithPolypropylene Core for Demanding Applications

    ·Retention Ratings from 0.5umto 75um

    ·Graded Pore Structure Increases Dirt Holding Capacity and Filtration Efficiency

    ·ProprietaryCenterCore for Greater Mechanical Strength

    ·Easy and Safe Cartridge Incineration or Disposal -100% Polypropylene Construction

    ·Free of Surfactants, Binders, Anti-static Agents and Adhesives

    ·All Materials are FDA Listed for Food and Beverage Contact

    ·Double Open End and Single Open End Cartridge Configurations Available

    Product Specifications

    Materials of Construction:

    ·Filter Media: Polypropylene

    ·Center Core: Polypropylene  

    ·End Caps: Polypropylene

    ·Extended Core: Polypropylene

    ·Gaskets/O-Rings: Silicone, Buna-N, Viton , EPDM

    Dimensions:

    ·Outside Diameter: 2.5”(63mm)

    ·Inside Diameter: 1.1” (28mm)

    ·Lengths: 4”to 50” (101.6mmto 1270mm)

    Performance Specifications

    ·Retention Ratings: 0.5, 1,3,5,10,20,30,50,75µm

    Operating Conditions:

    ·MaximumOperatingTemperature: 185°F(85°C)

    ·RecommendedChange Out Differential Pressure: 35psid(2.4 bar)

    FDA Listed Materials

    All Materials Meet U.S. Food and Drug Administered Requirements for Food and Beverage Contact (CFR 177.1500)

    Toxicity

    All Cartridge Components Meet USP-XXIII, Class V Criteria

    Purity

    All Filter Cartridges are Free of Surfactants, Anti-static agents, Binders and Adhesives

    Ordering Information

    PAT

    5-

    20

    P-

    3

    E

    Product Name

    Retention Rating

    Cartridge Length

    Core Material

    End
         Configurations

    O-ring Materials

    POLY-
    ADCT

    0.5, 1, 3, 5, 10, 20, 30, 50, 75µm

    4", 9.87", 10", 19.5", 20", 29.5", 30", 39.5", 40", 50"

    P = PP

    DOE = No Symbol  
    3 = SOE with 222 O-rings, Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End
    PE = PE Gaskets

    N = Buna-N
    E = EPDM
    V = Viton
    S = Silicone

    Micro-Flow Series Filter Cartridges

    High Flow Asymmetric Polyethersulfone Membrane Cartridges for Critical Applications

    ·Patented Highly Asymmetric PES Membrane

    ·100% Pre-flushed and Integrity Tested

    ·Retention Ratings from 0.04 to 1.2µm

    ·Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·High Purity Polypropylene Outer Cage Enhances Structural Strength of Filter Cartridges

    ·Fast Rinse-Up to 18 Megohm-cm

    ·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

    ·Manufactured Under a Certified ISO 9001 Quality System

    ·Manufactured in a Class 1,000 Clean Room

    Product Specifications

    Materials of Construction:

    ·Filter Media: Highly Asymmetric Polyethersulfone Membrane

    ·Hardware: Polypropylene

    ·Sealing: Thermal Bond

    ·Support Material: Polypropylene

    ·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 2.67" (68mm)

    ·Lengths: 4" (102mm), 9.75" (248mm), 10"(254mm), 19.5" (495mm), 20"(508mm), 29.25"

                    (743mm), 30" (762mm), 39" (991mm), 40" (1016mm)

    Performance Specifications

    ·Retention Ratings: 0.04, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2µm

    Operating Conditions:

    ·Maximum Operating Pressure: 75psid (5.1 bar) @ 68°F(20°C)

                                      40 psid (2.8bar) @ 150°F (65°C)

    ·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

    FDA Listed Materials:

    Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

    Sanitizing Agents:

    Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information

    Rinse-Up:

    Cartridges will Rinse-Up to 18 Megohm-cm with a Minimum of Throughput

    Sterilization:

    Multiple Autoclaving for 30 Minutes at 250°F (121°C) under No End Load Conditions. In-Line Steam Sterilization is Not Recommended. May be In-Line Sanitized With Hot Water at 180°F (82°C) for 1 Hour

    Ordering Information

    MFN

    0.2-

    10-

    3

    E

    Product
         Name

    Retention Rating

    Cartridge
         Length

    End Configurations

    Materials of      O-rings/Gaskets

    Micro-Flow

    0.04, 0.10.2, 0.45,0.65, 0.81.2µmabs.

    4",10",20",
    30",40"

    DOE = No Symbol  
    3 = SOE with 222 O-rings,
    Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End

    E=EPDM
    V=Viton
    S=Silicone
    F=Teflon Encapsulated Viton

    Tech-Flow Series Filter Cartridges

    ePTFE Membrane Cartridges forAggressive Liquid and Gas Filtration

    ·Biologically InertandChemically Resistant PTFE Media

    ·Absolute Construction with Retention Ratings of 0.05, 0.1, 0.2, 0.45, or 1.0µm

    ·Uniform Pore Size Throughout Membrane for High Contaminant Retention Capacity and Flow Rate

    ·Each Filter Element Stamped with Pore Size, Lot and Serial Number for Identification and Traceability

    ·High Purity Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

    ·100% Flushed with 18 Megaohm- cm DI Water and Integrity Tested

    ·Filters are Manufactured, Flushed, Tested and Packaged in a Class 1,000 Clean Room Environment

    ·Manufactured Under a Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media: Expanded Polytetrafluoro-ethylene (ePTFE) Membrane

    ·Hardware:  Standard: Polypropylene

    Optional: High Density Polyethylene

    ·Sealing: Thermal Bond

    ·Support Material: Polypropylene

    ·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 2.67" (68mm)

    ·Lengths: 4" (102mm), 9.75" (248mm), 10"(254mm), 19.5" (495mm), 20"(508mm), 29.25" (743mm),

                       30" (762mm), 39" (991mm), 40" (1016mm)

    Performance Specifications

    ·Retention Ratings: 0.05, 0.1, 0.2, 0.45, 1.0µm

    Operating Conditions:

    ·Maximum Operating Pressure: 80 psid (5.5 bar) @ 68°F (20°C)

                                         20 psid (1.4 bar) @ 203°F (95°C)

    ·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

    FDA Listed Materials:

    Manufactured from MaterialsWhich are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

    Sanitizing Agents:

    Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information

    Ordering Information

    TEF

    0.2-

    10-

    P

    3

    E

    Product
         Name

    Retention Rating

    Cartridge
         Length

    Material of Center Core

    End Configurations

    Materials of      O-rings/Gaskets

    Tech-Flow

    0.05, 0.1, 0.2, 0.45, 1µmabs.

    4",10",20",
    30",40"

    P = Polypropylene
    PE = High Density Polyethylene

    DOE = No Symbol
    3 = SOE with 222 O-rings,
    Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End

    E=EPDM      
    V=Viton
    S=Silicone           F=Teflon Encapsulated  
    Viton

    UPW-Flow Series Filter Cartridges

    Highly Asymmetric Membrane Cartridges for High Purity Water Applications

    ·Proprietary Highly Asymmetric Polyethersulfone Membrane Delivers a Combination of High Flow Rates and High DirtHolding Capacity

    ·Absolute Rated at >99.9% Efficiency with Retention

    ·Retention Ratings from 0.04to 1.2µm

    ·Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·Fast Rinse-Up to 18 Megohm-cm

    ·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

    ·Manufactured Under a Certified ISO 9001 Quality System

    ·Manufactured in a Class 1000 Clean Room

    Product Specifications

    Materials of Construction:

    ·Filter Media: Highly Asymmetric Polyethersulfone Membrane

    ·Hardware:  Polypropylene

    ·Sealing:  Thermal Bond

    ·Support Material:  Polypropylene

    ·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 2.67" (68mm)

    ·Lengths: 4" (102mm), 9.75" (248mm), 10"(254mm), 19.5" (495mm), 20"(508mm), 29.25" (743mm),

                        30" (762mm), 39" (991mm), 40" (1016mm)

    Performance Specifications

    ·Retention Ratings: 0.04, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2µm

    Operation Conditions:

    ·Maximum Differential Pressure: 75psid (5.1bar) @ 68°F(20°C)

                                           40psid (2.8bar) @150°F(65°C)

    ·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

    FDA Listed Materials:

    Manufactured from Materials Which are FDA Listed for Food Contact Applications in Title 21 of the U.S. Code of Federal Regulations

    Sanitizing Agents:

    Cartridge May be Sanitized in Place with Common Oxidizing Agents. Consult Factory for Compatibility Information

    Rinse-Up:

    Cartridges will Rinse-Up to 18 Megohm-cm with a Minimum of Throughput

    Pre-Rinsing:

    A Pre-Rinse is Available upon Request

    Ordering Information

    UPW

    0.2

    10-

    3

    E

    Product
          Name

    Retention Rating

    Cartridge
          Length

    End Configurations

    Materials of      O-rings/Gaskets

    UPW-Flow

    0.04, 0.1,0.2, 0.45,0.65, 0.81.2µmabs.

    4",10",20", 30",40"

    DOE = No Symbol
    3 = SOE with 222 O-rings,
    Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End

    E=EPDM;
    V=Viton  
    S=Silicone
    F=Teflon Encapsulated Viton

    Pleated

    Extra-Flow Series Filter Cartridges

    Absolute Rated Depth Pleated Cartridges, Excellent for Gel Removal

    ·Combining the Advantages of Depth Cartridge and Traditional Pleated Cartridge

    ·Innovative Fusion of Depth and Pleated Technologies Delivers Superior Performance when Removing Gels

    ·Proprietary Gel Capturing Filter Media - Geltrap

    ·High Surface Area for Long Service Life

    ·Micro Denier Melt Blown Fibers for High Efficiency Filtration

    ·Absolute Rated at >99.9% Efficiency with Retention

    ·High Flow Rates with Low Pressure Drops

    ·All Polypropylene Construction

    ·Manufactured in a Clean Room Environment - Class 10,000

    ·Manufactured Under a Certified ISO 9001 Quality System      

    Product Specifications

    Materials of Construction:  

    Filter Media: Polypropylene MeltBlown

    ·Hardware:  Polypropylene

    ·Cage/Netting: Polypropylene

    ·Support Material: Polypropylene

    ·Sealing:  Thermal Bond

    ·Gaskets/O-rings:  Silicone , Buna N, EPDM, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter:  2.67" (68mm)

    ·Lengths: 4" (102mm), 9.75" (248mm),

                         10" (254mm), 19.5" (495mm),

                         20" (508mm), 29.25" (743mm),

                         30" (762mm), 39" (991mm),

                         40" (1016mm)

    Surface Area:      

    Up to 2.5 ft2 (0.23 m2) of EffectiveFiltration Area per 10" (254mm) EquivalentDepend on Micro Rating

    Performance Specifications

    Retention Ratings:  1, 3, 5, 10, 20, 30, 40µmAbsolute

    Operating Conditions:

    ·Maximum OperatingPressure: 70 psid (4.8 bar) @ 120°F (49°C)

                       40 psid(2.8 bar) @ 150°F (65°C)

    ·Recommended Change Out Differential Pressure: 35 psid (2.4 bard)

    FDA Listed Materials:

    Manufactured from Materials Which are FDA Listed for FoodContact Applications in Title 21 of the U.S. Code of FederalRegulations

    Toxicity

    All Components meet the Specifications for Biological Safetyas per the USP for Class VI-121°C Plastics (Gaskets/O-ringsExcluded)

    Purity:

    Cartridges are Free of Surfactants, Resins, Binders andAdhesives

    Sterilization:

    Multiple Autoclaving for 30 Minutes at 250°F (121°C) underno End Load Conditions. In-line Steam Sterilization is not

    Recommended. May be In-line Sanitized with Hot Water at180°F(82°C) for 1 Hour

    Ordering Information

    EXA

    5-

    10-

    3

    E

    Product
         Name

    Retention
         Rating

    Cartridge
         Length

    End Configurations

    Materials of      O-rings/Gaskets

    Extra-
    Flow

    1,3,5,10,20,30,

    40µm abs.

    4”,10”,20”,
    30”,40”

    DOE = No Symbol  
    3 = SOE with 222 O-rings,
    Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End

    E=EPDM      
    V=Viton  
    S=Silicone        
    F=Teflon Encapsulated Viton

    FasClean-Flow Series High Flow Filter Cartridges

    Extra Large Filtration Surface Area Filter Cartridge, Suitable for TFT-LCD and High Purity Water Applications

    ·Ideally Suited for Most LCD and TFT Wet Processing Applications and  the Filtration of High Purity Water

    ·Suitable for Generation 7 and 8 TFT-LCD Glass Cleaning and High End Process Filtration Applications

    ·Wide Range of Filter Media and Retention Ratings Available,Enabling Optimization of Critical Processes

    ·High Purity Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·Compact Design Permits Efficient Filter Change-OutsReducing Equipment Down-Time and Maintenance Costs

    ·Each Filter Element Stamped with Pore Size, Lot and Serial Number for Identification and Traceability

    ·High Purity Polypropylene Outer Cage and Center Core Enhances Mechanical Strength of the Filter Cartridges

    ·100% Flushed with 18 Megohm-cmDI Waterand Integrity Tested.

    ·Filters are Manufactured, Flushed, Tested and Packaged in a Class 1,000 CleanRoom Environment

    ·ManufacturedUnder a Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media: E:   Depth Melt Blown Polypropylene

                           P:   High Flow Melt Blown Polypropylene

                           S:   Highly Asymmetric PES Membrane

                           T:  Expanded Polytetrafluoro-ethylene (ePTFE) Membrane

    ·Hardware: High Purity Polypropylene

    ·Sealing:  Thermal Bond

    ·Support Material: Polypropylene

    ·Gaskets/O-rings:  EPDM, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 5.16”(131mm)

    ·Lengths: 10" (254mm)

    Performance Specifications

    Retention Ratings:  E:  1, 3, 4.5, 10, 20µmAbsolute

                               P:   0.45, 1, 4.5, 10, 20µm

                               S:   0.1, 0.2, 0.45, 0.8, 1.2, 5µmAbsolute

                               T:    0.1, 0.2, 0.45, 1, 3, 10µmAbsolute

    Operating Conditions:

    ·Maximum Operating Temperature: 168°F(75°C)

    ·Recommended Change Out Differential Pressure: 35psid (2.4bar)

    Ordering Information

    FCF

    P-

    5-

    10-

    334

    E

    Product Name

    Materials

    Retention Rating

    Cartridge Length

    End Configurations

    Materials of O-rings

    FasClean-Flow

    E = Depth
    PP P = High Flow PP
    S = PES T = PTFE

    1 ~ 20µmabs.
    0.45 ~ 20µmabs
    0.1 ~ 5µmabs.
    0.1 ~ 10µmabs.

    10"

    334 = SOE Flat End

    E = EPDM
    V = Viton
    F = Teflon
    Encapsulated Viton

    Mega-Flow Series High Flow Filter Cartridges

    High Surface Area Filter Cartridge, Suitable for Applications in the TFT-LCD Industry

    ·Ideally Suited for Most LCD and TFT Wet Processing Applications and the Filtration of High Purity Water

    ·Wide Range of Filter Media and Removal Ratings Available Enabling Optimization of Many Processes

    ·High Purity Polypropylene Hardware Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·Compact Cartridge Design Offers Long On-Stream Life Reducing Equipment Down-Time and Maintenance Costs

    ·Each Filter Element Stamped with Pore Size, Lot and Serial Number for Identification and Traceability

    ·100% Flushed with 18 Megaohm-cm DI Water for PES and PTFE Media

    ·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

    ·Filters are Manufactured, Flushed, Tested and Packaged in a Class 1,000 CleanRoom Environment

    ·Manufactured Under a Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media:   MEP: High Flow MeltBlown Polypropylene

                             MES:  Highly Asymmetric PES Membrane

                             MEF Expanded Polytetrafluoro-ethylene (ePTFE) Membrane

    ·Hardware: High Purity Polypropylene

    ·Sealing: Thermal Bond

    ·Support Material: Polypropylene

    ·Gaskets/O-rings: Silicone, EPDM, Burn-N,Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 3.2”(83mm)

    ·Lengths: 10" (254mm)

    Performance Specifications

    ·Retention Ratings:  MEP: 0.25, 0.45, 0.8, 2, 5, 10µm

                                  MES:  0.1, 0.2, 0.45µm

                                  MEF 0.1, 0.2, 0.45µm

    Operating Conditions:

    ·Maximum Operating Temperature: 168 °F(75°C)

    ·Recommended Change Out Differential Pressure: 35psid (2.4bar)

    Ordering Information

    MEP

    5-

    10-

    6

    E

    Product
         Name

    Retention Rating

    Cartridge
         Length

    End Configurations

    Materials of      O-rings/Gaskets

    Mega-Flow
    MEP (PP) MES (PES)
    MEF (PTFE)

    0.25~10µm0.1~0.45µmabs.
    0.1~0.45µmabs.

    10”, 20”

    3 = SOE with 222 O-rings,
    Flat Closed End
    6 = SOE with 226 O-rings,
    Flat Closed End

    E = EPDM
    V = Viton  
    F = Teflon
    Encapsulated Viton

    Multipleat High Flow Series Filter Cartridges

    High Flow Pleated Cartridges Incorporating Proprietary Melt Blown Filter Media

    ·Very High Surface Area per Cartridge - High Flow Rates, Long Service Life and Reduced Maintenance Costs

    ·Insideto Outside Flow Configuration-All Contaminants Held Within the Single Open Ended Filter

    ·Available in 20", 40" and 60" Lengths

    ·Proprietary Filter Media Produced for Filtrafine Delivers Highly Consistent Performance

    ·Fixed Pore Construction – Resists Dirt Unloading at High Differential Pressures

    ·Polypropylene Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

    ·Manufactured in a Class 1,000 Clean Room

    ·Manufactured Under a Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media: MeltBlown Polypropylene

    ·Hardware:  Polypropylene

    ·Sealing:  Thermal Bond

    ·Support Material: Polypropylene

    ·O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 6" (152mm)

    ·Lengths: 20” (508mm), 40” (1016mm), 60”(1524mm)

    Performance Specifications

    ·Retention Ratings: 1, 3, 4.5, 10, 20, 40µm Absolute

    Operating Conditions:

    ·Maximum Operating Temperature: 140°F(60°C)

    ·Recommended Change Out Differential Pressure: 30psid (2.1bar)

    FDA Listed Materials:

    Manufactured from Materials Which are FDA Listed for FoodContact Applications in Title 21 of the U.S. Code of FederalRegulations

    Toxicity:

    All Polypropylene Components meet the Specifications forBiological Safety as per the USP for Class VI-121°C Plastics(Gaskets/O-rings Excluded)

    Typical Applications

    ·Food and Beverage

    ·Seawater Desalination

    ·Cooling Water

    ·Industrial Water

    ·RO Pre-filtration

    ·Amine Circulation Filtration

    ·Process Water and Waste Water Treatment

    Retention Rating / Liquid Flow Rate vs. Initial Pressure Drop

    Retention Rating (Absolute) µm

    Initial Pressure Drop 20”/508mm Length (psid/gpm)/(x100)bar/lpm

    Initial Pressure Drop 40”/1016mm Length (psid/gpm)/(x100)bar/lpm

    Initial Pressure Drop 60”/1524mm Length (psid/gpm)/(x100)bar/lpm

    1

    0.0090 / 0.0164

    0.0049 / 0.0089

    0.0040 / 0.0073

    3

    0.0070 / 0.0127

    0.0035 / 0.0064

    0.0027 / 0.0049

    4.5

    0.0042 / 0.0076

    0.0022 / 0.0040

    0.0017 / 0.0031

    10

    0.0035 / 0.0064

    0.0019 / 0.0035

    0.0010 / 0.0018

    20

    0.0025 / 0.0046

    0.0013 / 0.0024

    0.0009 / 0.0016

    40

    0.0010 / 0.0018

    0.0007 / 0.0013

    0.0005 / 0.0009

    Recommended Maximum Flow Rate per Cartridge To Optimize System Performance

    Length of Cartridge

    Recommended Operation Flow Rate (gpm) / (m3/hr)

    20”

    110 / 25

    40”

    220 / 50

    60”

    308 / 70


    Ordering Information

    MHF

    010-

    620-

    E

    Product   Name

    Absolute Micron Rating (µm)

    Cartridge  Length

    Materials of O-rings

    Multipleat High Flow

    010 = 1
    030 = 3
    045 = 4.5
    100 = 10
    200 = 20
    400 = 40

    20
    40
    60

    E = EPDM
    V = Viton
    S= Silicone
    F = Teflon Encapsulated Vito

    Pleated-Flow Series Filter Cartridges

    High Performance Pleated Polypropylene Melt Blown Cartridges Deliver Consistent Performance and Long On-Stream Life

    ·Proprietary Filter Media Produced for Filtrafine Delivers Highly Consistent Performance

    ·Fixed Pore Construction – Resists Dirt Unloading at Maximum Differential Pressure

    ·Polypropylene Construction – Inert to Many Process Fluids Ensuring Wide Chemical Compatibility

    ·High Surface Area – High Flow Rates and Long Service Life Reduced Maintenance Costs

    ·Rigid Polypropylene Core Enhances Structural Strength of Filter Cartridges

    ·Fast Rinse-Up to 18 Megohm-cm

    ·Various Gaskets/O-ringsMaterials – Compatible with Many Fluids

    ·Manufactured in a Class 10,000 Clean Room

    ·Manufactured Under a Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media:  Polypropylene

    ·Hardware:  Polypropylene

    ·Sealing:  Thermal Bond

    ·Support Material:  Polypropylene

    ·Gaskets/O-rings: Silicone, EPDM, Buna-N, Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 2.67" (68mm)

    ·Lengths: 4" (102mm), 9.75" (248mm),

                      10"(254mm), 19.5" (495mm),

                      20"(508mm), 29.25" (743mm),

                      30" (762mm), 39" (991mm),

                      40" (1016mm)

    Performance Specifications

    ·Retention Ratings: 0.2, 0.25 0.45, 0.8, 2, 3, 5, 10, 30µm

    Operating Conditions:

    ·Maximum OperatingPressure: 75 psid (5.1 bar) @ 68°F (20°C)

                                    40 psid (2.8bar) @ 150°F(65°C)

    ·Recommended Change Out Differential Pressure: 35 psid (2.4 bar)

    FDA Listed Materials:

    Manufactured from Materials Which are FDA Listed for FoodContact Applications in Title 21 of the U.S. Code of FederalRegulations

    Toxicity:

    All Polypropylene Components meet the Specifications forBiological Safety as per the USP for Class VI-121°C Plastics(Gaskets/O-rings Excluded)

    Purity:

    Cartridges are Free of Surfactants, Resins, Binders and Adhesives

    Sterilization:

    Multiple Autoclaving for 30 Minutes at 250°F (121°C) underNo End Load Conditions. In-Line Steam Sterilization is NotRecommended. May be In-Line Sanitized with Hot Water at180°F(82°C) for 1 Hour.

    Ordering Information

    PLT

    5-

    10-

    3

    E

    Product
          Name

    Retention Rating

    Cartridge
          Length

    End Configurations

    Materials of      O-rings/Gaskets

    Pleated-
    Flow

    0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30µm

    4",10",20",
    30",40"

    DOE = No Symbol  
    3 = SOE with 222 O-rings,
    Flat Closed End
    8 = SOE with 222 O-rings,
    Fin End
    7 = SOE with 226 O-rings,
    Fin End

    E=EPDM      

    V=Viton  
    S=Silicone    
    F=Teflon Encapsulated Viton


    Stainless

    Metal-Flow Series Filter Cartridges

    Suitable for High Temperature, High Pressure, and Corrosive Applications; Cartridges can be Regenerated in Many Processes

    ·Available with Sintered Stainless Steel Fiber or Sintered Fiber Mesh Filter Media

    ·304 or 316 Stainless Steel Filter Cartridge is Cleanable in a Variety of Applications

    ·High Surface Area Pleated Configuration for Additional On-stream Life

    ·Robust, AllWelded Construction

    ·Single Open End Configurations Available for Greater Sealing Integrity

    ·Retention Ratings from 1 to 100µm

    ·Lengths from 10” to 40” (254mm~1016mm)

    ·Available in Configurations to Fit Existing Filter Housings. Custom Cartridge Designs are Also Available

    ·Manufactured Undera Certified ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media: 304or 316Sintered Stainless Steel Fiber or Sintered Wire Mesh

    ·Support Media: Stainless Steel Sintered Mesh

    ·Hardware:  304or 316Stainless Steel

    ·End Caps: 304or 316Stainless Steel

    ·Sealing:  Tig Welded

    ·Gaskets/O-rings: Silicone, EPDM,Viton, Teflon Encapsulated Viton

    Dimensions (nominal):

    ·Outside Diameter: 2.7” (68mm)

    ·Lengths: 10" to 40” (254mm~1016mm)

    Performance Specifications

    ·Retention Ratings: 1, 5, 10, 25, 50, 75, 100µm

    Operating Conditions:

    ·Maximum Forward Differential Pressure: 145 psid (10 bar)

    ·Maximum Reverse Differential Pressure: 29 psid (2 bar)

    ·Maximum Continuous Operating Temperature:  392 °F(200°C) Please Check Gasket Temperature Compatibility

    Ordering Information

    SSP

    5-

    10-

    S-

    3

    E

    Product Name

    Retention Rating

    Cartridge Length

    Material

    End Configurations

    Materials of O-rings

    Metal-Flo
    SSD = Depth Type
    SSP = Pleated Type

    1, 5, 10, 25, 50, 75, 100µm

    10", 20”, 30”,40”

    A = 304 SS
    S = 316 SS

    DOE = No
    Symbol 3 = SOE with 222 O-rings,
    Flat Closed End

    E = EPDM
    V = Viton
    S = Silicone
    F = Teflon Encapsulated Viton


    Winding

    Wound-Fine BB Series Filter Cartridges

    Multi-Purpose Depth Filter Cartridges that Deliver Reliable, Consistent Performance for Use in Big Blue Housings

    ·Graded Pore Structure for Efficient Removal of a Wide Range of Particle Sizes

    ·Cartridges Manufactured byComputerized and State-of-the-Art Equipment to Ensure Consistent Quality

    ·Optional Inner Core Cover to Minimize Fiber Migration

    ·Available in Cotton and Polypropylene Media

    ·Wide Chemical Compatibility

    ·Cartridge Lengths from 10” to 20”

    ·Special Outside Diameter of 4.3”

    ·Manufactured Under an ISO 9001 Quality System

    Product Specifications

    Materials of Construction:

    ·Filter Media: Premium Bleached Cotton (FDA Listed)

                            Cleaned Polypropylene (FDA Listed)

    ·Center Core:  Polypropylene

                          304 Stainless Steel

    Dimensions

    ·Length:  10" to 20" (254mm to 508mm)

    ·Inner Diameter: 1.1” (28mm)   

    ·Outer Diameter: 4.3” (110mm)

    Performance Specifications

    ·Retention Ratings: 1, 3, 5, 10 and 20µm

    ·Maximum Temperature: See Material Selection Guide

    Material Selection Guide


    Filter Medium

    Premium
         Bleached Cotton  (FDA Listed)


           
         Cleaned
         Polypropylene
         (FDA Listed)


    Max.
    Temp.

    Stainless Steel Core

    300°F
    130°C

    200°F
    95°C

    Polypropylene Core

    140°F
    60°C

    140°F
     60°C


    Food, Potable Water

    Excellent

    Excellent

    Compatibility

    Oils

    Excellent

    Excellent

    Organic Acids

    Good

    Excellent

    Alkalis

    Good

    Excellent

    Ordering Information

    WF-

    5-

    P

    10

    P-

    BB

    Product Name

    Retention Rating

    Filter Media

    Cartridge  Length

    Core  Material

    End Configuration    

    Wound-
         FineBB

    1,3,5,10 ,20µm

    P=Cleaned PP  
         C=PremiumBleached Cotton

    10”,20”

    P=PP
         A=304 SS

    BB=For Big Blue Size

    Wound-Fine Series Filter Cartridges

    Multi-Purpose Depth Filter Cartridges that Deliver Reliable, Consistent Performance Over Time

    ·Graded Pore Structure for Efficient Removal of Wide Range of Particle Sizes

    ·Available in Cotton, Polypropylene and Glass Fiber Media Ensuring Wide Chemical Compatibility

    ·Cartridges Manufactured byComputerized and State-of-the-Art Equipment to Ensure Consistent Quality

    ·WideRangeof Micron

    ·Proprietary Helical Center Core Provides Added Mechanical Strength in Demanding Applications

    ·Use of Optional Inner Core Cover to Minimize Fiber Migration

    ·Single Open End Cartridge Configurations Available

    ·Wide Chemical Compatibility

    ·Cartridge Lengths From 9.75” to 70”

    ·Extended Core Available

    ·Manufactured Under a Certified ISO 9001 Quality System

    Product Specifications

    Material of Construction:

    ·Filter Media: Premium Bleached Cotton(FDA Listed)

                         Cleaned Polypropylene(FDA Listed)

                         Glass Fiber

    ·Center Core: Polypropylene

                          304 Stainless Steel

                          316 Stainless Steel

    ·Extended Core Option:  Polypropylene

                                      304 Stainless Steel

                                      316 Stainless Steel

    ·Core Cover Option: Used to Control Fiber Migration. Compatible with Existing Fiber

    Dimensions:

    ·Length: 9.75"to70" (248mm to1778mm)

    ·Inner Diameter:  1.1”(28mm)

    ·Outer Diameter: 2.5” (63mm)

    Performance Specifications

    ·Retention Ratings:  0.5, 1, 2, 3, 5, 7, 10, 15, 20, 25, 30, 40, 50, 75, 100, 150, 200µm

    Operating Conditions:

    ·Maximum Temperature Ratings: See Material Selection Guide

    Material Selection Guide



    Filter Medium

    Premium Bleached Cotton  (FDA Listed)

    Cleaned
    Polypropylene
    (FDA Listed)

    Glass Fiber

    Max. Temp.

    Stainless Steel Core

    300°F 

        130°C

    200°F
    95°C

    750°F
     400°C

    Polypropylene Core

    140°F
    60°C

    140°F 

           60°C

    140°F 

         60°C

    Compatibility

    Food, Potable Water

    Excellent

    Excellent

    Poor

    Organic Solvents

    Excellent

    Good

    Excellent

    Oils

    Excellent

    Excellent

    Excellent

    Organic Acids

    Good

    Excellent

    Excellent

    Alkalis

    Good

    Excellent

    Poor

    Oxidizing Agents

    Fair

    Good

    Excellent

    Steam, Non Continuous

    N/R

    Fair

    N/R

    Strong Acids

    N/R

    Excellent

    Excellent

    Dilute Acids

    Fair

    Excellent

    Excellent

    Micro Organism Resistance

    Poor

    Excellent

    Excellent


    Ordering Information

    WF-

    5-

    P

    10

    P-

    EP

    Product Name

    Retention Rating

    Filter Media

    Cartridge  Length

    Core  Material

    ExtendCore

    Wound-
         Fine

    0.5,1,3,5,10,20,

    25,30,

    50,75,100, 150, 200µm

    P=Cleaned PP  
    C=Premium 

    Bleached Cotton  
    G=Glass Fiber

    9.75",10",19.5",20",

    29.5",30",
    39.5",40",
    50”(SS core), 60” (SS core), 70” (SS core)

    P=PP  
    A=304 SS   S=316 SS

    EP=Polypropylene EA=304 SS  
    ES=316 SS  
    3=SOE with 222 O-rings,
    Flat Closed End
    8=SOE with 222 O-rings,
    Fin End
    C=Core cover

    European service Office:

    Contact: peter dellhage

    Tel:+46 31 7145664

    Mobile: +46 768 672470

    Skype: pdellhage

    Mail:peter@zhenxingfiltech.com

    MESH and metal filter parts FACOTRY :

    TIAN TAI ZhenXing wire mesh factory 

    ADD: pingqiao industry zone, tiantai, zhejiang, China

    CN 317203

    Hunter GeXiongfei

    Tel: +86-18958507619

    Fax:+86-576-83661619

    Email: wiremesh@ttwire-mesh.com

               Hunter@zhenxingfiltech.com

    FELT AND BAG FACTORY:

    ADD: pingqiao industry zone, tiantai, zhejiang, China

    CN 317203

    CONTACT:Totti

    Tel: +86 13989313130

    Fax:+86 0576 83661619

    Email: totti@zhenxingfiltech.com

Send your message to this supplier
To:  

Tiantai Zhenxing Feiltech Factory

* Content:  

For better quotations, include:

- A self introduction

- Special requests, if any

Quantity:  

  
You May Like
Not exactly what you want? One request, multiple quotations Get Quotations Now >>